Viewing entries in
36 exposures

Which Film Camera to buy for beginners ?

2 Comments

Which Film Camera to buy for beginners ?

So many film cameras in the market, which one should you buy ? Here are some tips for those who is starting out :

1. Keep it simple - The simpler film camera is , the less likely the camera will fail. Even if it fails, it would be easier and cheaper to repair. One have to consider the age of these film cameras could be as old as your parents A Leica M3 would probably be around 65 years old by now. I would suggest to get a camera with full mechanical function which does not rely on battery to operate.

2. Work within your budget - There is a huge range of film cameras in the market and their price varies from USD 40 all the way to USD 40k depending on the brand , rarity and condition. The Nikon FM or FE2 , Canon Canonet, Olympus 35SP, Yashica 124G, Minolta Autocord and Asahi Pentax are pretty affordable for newbies.

3. Type of cameras, Rangefinder or SLR - This depends on your shooting style. I would suggest rangefinder style camera if you love to shoot streets, travel and journalistic as rangefinder is more suited for the wide to mid range zoom lenses. The size is compact , less obtrusive and usually very light. Go for SLR if you love doing portrait , macro, sports or wildlife. What about TLRs you may asked ...well I wouldn't recommend it as your first camera as the number of shots per roll is a lot less as it is a medium format camera. You will only get 12 exposures for roll of film hence make your learning curve a lot more expensive.

3. Keep it small - There is a saying ' The best camera is the one with you ! '. I would suggest to start out with a camera which is small and portable so you would use it more. We understand that huge and bulky cameras such as the Hasselblad  500cm and Mamiya RZ67 looks uber cool but it require quite a bit of muscle to lug it around. It certainly not an everyday camera for you to learn. First the number of exposures are greatly reduced ( the Hassie 500cm only clocks 12 shots ) , the processing fee is pretty much the same hence the cost per shot is a lot higher !

4. Availability of film format and place to process the negatives - Through out the years many film format has already been discontinued. Hence if you found a camera with the below format kindly avoid them at all cost unless it plan to keep the camera as a paper weight or a display item - 220 ( discontinued ) , large format 4 x 5 and 8 x 10

5. BATTERY type - Many of the older film cameras out there uses mercury battery which is no longer in production. Always check if there is a replacement / substitute battery which you could use. If not it would be pointless to own a camera which you can't operate unless you are a camera collector.

 

2 Comments

Leica M3 Review

2 Comments

Leica M3 Review

MKP_3669cv.jpg
MKP_3674.jpg

The Leica M3 is one amazing camera and I absolutely love it to the max. I had this camera for almost 5 years after I bought my Leica M2. I have always loved the design and built  of the film Leica cameras particularly those made in the  early 50’s till early 70’s.The built quality and use of materials are impeccable which explains why it still look pretty darn good after 50 over years. The finish is flawless even till today and it has the smoothest film advance I have ever come upon on a film camera. It feels like it’s running on a layer of butter !

The M3 is the first M series ever produced by Leica in Solms, Germany back in 1954. Equipped with a bright 0.92x viewfinder, 3 frames lines ( 50, 90 and 135 ), a self timer and 1/1000th sec shutter speed is all the features there is in this camera. Pure simplicity and only the essentials. What I love most about this camera ( besides it’s look ) is the viewfinder. It has the clearest and highest magnification viewfinder among all the M series and best of all it’s flare resistant ! The newer M6 classic, M6 TTL and M7 are prone to flare which makes focusing really difficult when shooting against strong lights. Only the recent Leica MP has flare proof RF like the M3. As I love shooting against back light , this is a truly a blessing. 

The 50mm frame is permanently visible, with broad white lines and rounded corners.
The 90 and 135mm frames pop up when the corresponding lens is inserted. Very clever and first in it's class back in that era. 
If there is a need to use 35mm or wider lenses, the M3 with its basically 50mm viewfinder is handicapped and it’s almost impossible to guess the exact frame lines. The only way would be to use the Leica 35mm with auxiliary reducing goggles or an additional 35mm view finder attached to the camera hot shoe. Easy fix indeed.  

There are many variants of M3 in the market due to it's long production life , hence the serial number is the easiest way to gauge which version you are having. Older M3’s adopted the continental shutter speeds (1/25, 1/50, 1/100, 1/250) and later ones the international range (1/30, 1/60 etc.). The first version of the M3 has a smaller viewfinder frame , require double stroke to wind film ( cock twice instead of one time ) and lower ISO / ASA range on the indicator. Later models have subtle upgrades on all these parts. 

Film loading on the M3 is slightly conventional where one needs to remove the spool from the camera. It is indeed a little slower then the M6 quick load style but at least it is the most reliable and fool proof loading method. There are a few times where the film leader wasn’t securely fasten to the take up spool chamber on the M6. I know this is more like a user problem …but the M3 loading method does not have such room for errors. I heard that the quick load kit work wonders by converting the M3 conventional style to more modern M6 style but I was told that the film counter will not reset itself. I can live with it hence not a biggie for me.

I use this camera mainly for black and white photos. I love pairing it with the 50mm f2 dual range Summicron or the 5cm f2 collapsible cron with yellow filters for that classic black and white look. For metering, I’ll either use the sunny 16 rules when I’m outdoor or my trusty light meter apps on my iphone for more tricky lighting condition. Works great for so far and really enjoy using this camera a lot and I am a big fan of 50mm lenses. 

If you ever plan to get one , I would suggest hunt around for a serial number above 950,000 as most likely will have one with all the subtle upgrades implemented. Do check the rangefinder mirror too for signs of desilvering as repair would be costly. Comparing to the M2 , M5 , M6 classic , M6 ttl which I have, the M3 is still one of my all time favourite . 

2 Comments

3 Comments

Why you should own a Rolleiflex SL66 !

photo(5).JPG

The Rolleiflex SL66 is one of those under dogs camera which is not very popular among film shooters. I would say it's a hidden gem among all the 6x6 cameras. Those who love shooting in the studio would go for the ever so popular modular Hasselblad 500cm due to it's wide lens selection, additional motor winder / grips, optional finders, as well as Polaroid back options. Street and travel photographers would prefer the slightly lighter and smaller fixed lens Rolleiflex TLR  like the 2.8 f or 3.5 f. This SL66 I would say it's actually a beast on it's own. I had this camera for almost two years now and have taken quite a lot of images with it and it never fails to surprise. Here are 6 reasons why you should own one !

1. Best for close up portrait - The SL66 is the only few 6x6 format camera which has a bellow besides Mamiya C330. Bronica, Hassellad, Pentacon, Minolta Autocord, Yashica TLR as well as it's siblings Rolleiflex TLR doesn't offer this option.  The bellow enable you to do close up portrait without having to pay for additional extension rings and lenses.

2. It has the amazing Zeiss Plannar 80mm f2.8 - This is the legendary lens which is found on the amazing Hassie as well as the Rolleiflex 2.8f . The 80mm f2.8 Planar has gorgeous rendition and color reproduction. It's constantly spot on and the focal length is very usable. With an added bellow and reverse mount option for close up macro , the possibility is endless without spending a single penny ! For a Hassie, you would need to buy multiple close up extension rings for the same effect.

3. It has tilting bellow  ! As far as I know, only the SL66 has a tilting bellow for 6x6 format which gives your the flexibility of correcting your perspective like a tilt-shift lens. ( minus the shift of course ) . This gives a lot of flexibility for the user to control the focus point and to creature your signature look.

rolleiflexSL66builtin.jpg


4. Modular  - Just like the Hasselblad, the SL66 is just as flexible. You can customize and swap out any parts of the camera as you wish, from the focusing screen , finder, film back , lens, grips and etc. This is never a dull moment with this camera.

5. Fully mechanical - The SL66 is a full mechanical camera, hence there is no battery needed for operation. I always love full mechanical camera as it will just keeps going on and on. A good CLA will bring this camera back to life in no time. The elder siblings SL66E has a more modern  electronic circuit board for the metering but apart from that it's basically the same camera at a fraction of it's price.

6. It's more affordable than a Hassie. Well USED TO be . Comparing in term of price point, the SL66 is a lot cheaper than a regular 500cm and it's packs with tons of goodies. I got  mine 2 years ago for around USD 600 mint condition with a 80mm f2.8 lens with hood as well as a Rolleiflex original leather case. A Hasselblad 500cm is selling for around USD 1000 back then due to the fame with the Hassie brand. However SL66 price has gone up recently on ebay hence you might need to hunt around for a decent unit.


3 Comments

Comment

Hasselblad 500cm / 503cx Tips and Review

Hasselblad 503cx

As a photographer, I have always been curious to know how does it feels  to actually hold and shoot the world’s first camera which travels to the moon. The brand Hasselblad or Hassie in short has been synonym with amazing picture quality and workmanship as well as high flexibility. I can still remember the day clearly when I first collected the camera from the KLIA custom ( i got it off ebay ) . Opening up the parcel with utmost care and assembling the camera part by part while in the car until it finally take shape is truly hard to forget.


The 500cm as well as the rest of the Hassie are modular system cameras which allows user to mix and match the components whichever suits their needs. In other words, the photographer have the flexibility to choose different bodies, film or digital backs or even Polaroid back,  waist level or prism finder, focus screen as well as manual or motorized winders as per one’s preference / needs. I have both the 500cm as well as 503cx and they are almost identical. The only difference between these two siblings is the 500cm the more down to earth brother while the 503cx come with palpas internal coating at shutter curtain and mirror chamber which supposed to have a slightly better light absorption. The 503cx has the ability to do center-weight TTL Flash metering with appropriate SCA modules with certain capable flashes. Hence the 503cx has an ISO dial on the left side of the body as shown on the image on top. I use the 500cm more for natural light / out door shoots while the 503cx more for studio application as well as a back up. Both or can I say all the film Hassei runs on 120 / 220 film and it shoot 6x6 format which is Square ...think Instagram ! : )

I have replaced the original split focusing screens on these two Hassie with a high brightness Accumate screen which works really awesome. The clarity and brightness improved tremendously. I have also purchased a metered prim finder to go with it. I would highly recommend these two combination though the upgrade is not cheap. Prob will set you back around USD 350 for one set.

Starting with the body, the built quality and material used is indeed top notch. This Swedish made camera is cast out from an aluminum alloy body which is indeed very solid. The Carl Zeiss Planar 80mm f2.8 CF T* is one of the fastest lens in the Hassie line up. It’s small and light weight despite it’s metal construction. The focal length is almost equivalent to a 50mm lens on a full frame camera hence it's very useable. The CF*T lenses is the second generation Planar and it comes with Zeiss T* coating which helps with flare reduction. What I love most about this lens is the creamy bokeh as well as the amazing color reproduction. It’s to die for ! The sharpness is good even wide open. Being a medium format, the subject on the image just pops right out of the negatives / scans. I am starting to understand why Rolleiflex 2.8F , Rolleiflex SL66 as well as the legendary Contax 645 ( f2 version ) uses the 80 Planar lens. All the Hassies lens have a locking EV value on the aperture ring and shutter speed ring hence changing depth-of-view ( F stop ) while maintaining the same exposure during middle of a shoot is really a breeze.

In term of useability, the camera is pretty light for a medium format and it's so easy to size it down when you are traveling. Just replace the metered prism finder back with it's original waist level finder that would save you around 160gs easily. The Hassie fits perfectly into a Billingham Hadley Pro with two additional film backs being stored on the front pouches. Just awesome !

For first timer, using the Hassie is not an easy task. There are a lot of steps involved and the most crucial is to fully wound / cock  the shutter before you remove the lens or film back. There is a coupling system between the camera body and the lens right at 6 o'clock of the lens mount. It needs to be aligned accordingly ( in the horizontal position ) in order to mount the lens correctly without damaging the camera.

If the lens is removed when the shutter is not cocked, the cam on the lens will spring to the vertical position. You would have to use a small screw driver to turn the cam clock wise as per the arrow indication until the slot is aligned with the red dot on the left as per below diagram. Only then you can mount the lens back to the camera body.

On the right side of the camera body, there are also two indicator who show the status of the shutter, RED = Uncocked  WHITE = Cocked. Both indicator on the body as well as the film back needs to match as well in order to mount. Hence as a general rule of thumb, make it a habit to  cock the shutter all the time right after you fire a shot and you should be pretty much save from damaging the camera. Don't ever remove the lens when the shutter is not cocked else you will risk damaging the camera !

photo 2(4).JPG

Pros : It's modular and very versatile. Very well built and the Zeiss  80mm f2.8 CF optics is amazing even shot wide open. I absolutely love this glass !  I love the replacement accumatte focusing screen too. It's among the brightest in the market which makes focusing such a breeze.

Cons : The body and lens coupling can be a little tricky for new user . Make sure you spend time to read the user manual thoroughly before using it . It's also not cheap.

Buying tips : The price for the 500cm has been escalating quite a fair bit for the past two years specially with the Zeiss 80mm f2.8 CF*T lens.  I foresee this particular model will appreciate it price and become more collectible as it is really well made and a true classic. As the Hassie body is really simple in construction ( which basically is just a small mirror box ), it's pretty much problem free.

 

Click here for SAMPLE IMAGES

 

 

Comment

Comment

What is Rangefinder Cameras ?

Just like the tittle of this post implies, I love rangefinders camera A……LOT as compared to other types of cameras simply because of it’s focusing and shutter mechanism. All rangefinders camera usually utilizes either the focal-plane shutter (Leica M, Zorki, Kiev, Contax iia etc) or the leaf-shutter mechanism (Yashica Electro, Canon Canonnet, Minolta Hi-Matic, Mamiya 6/7 and etc).

Rangefinder cameras are usually much smaller than SLRs, quieter ( due to no flapping mirror ) , can be handheld at much slower speeds, flash sync at all speeds, focus in very low-light / low-contrast, are much more rugged, and usually cheaper except for the Leica of course. They are less complicated and moving parts thus less likely to break.

Using the rangefinder cameras require sometime of getting used to specially if one are used to shooting with a SLR . The images on the SLR viewfinder is ‘what you see what you get’ as it was focus through the lens. Rangefinder on the other hand focus through the viewfinder which is located on the side of the camera which is not through the lens.  To focus with these rangefinders, one would just have to turn the focusing tab on the lens to match the superimpose subject  in a small rectangular box right in the center of the viewfinder. It’s fairly easy when you are used to it. Being a rangefinder, the cloth shutter curtain is really silent  as it does not have a flapping mirror. Almost identical to our modern day mirror-less camera such as the Olympus Pen.  Also the size of the camera body and lenses is a lot less bulkier hence carrying the camera all day long would no be much of a problem. This is the reason why most street photography love using rangefinder camera as compared to SLR.

 

  • Pros

    1) Light weight and small

    2) Silent and unobtrusive

    3) Can be hand held at much lower shutter speed, say 1/15s on a 50mm.

    4) Sharper images as RF lenses normally protrudes deeply into the camera body and it’s very near to the capturing medium such a film or sensor.

    5) Superb wide angle and normal lenses

    6) No black out when the shutter is pressed.

    7) Superb framing. Easier for photographer to anticipate subject moving into the frame. 

    8) Very bright, aperture independent viewfinder

     

  • Cons

    1) Macro photography is almost impossible for film Rf camera.

    2) Parallax issue when shooting at close range - due to the distance between the viewfinder and lens position .

    3) DOF preview is non existence.

    4) Telephoto lenses are limited to 135 mm or shorter due to frames line restriction.

Comment